Mounted coil tilter KNR-2100 from the manufacturer - KRMZ
AGRICULTURAL MACHINERY FROM THE MANUFACTURER
PERM REGION
Hot line for forage conservation
REQUEST A CALLBACK

Mounted coil tilter KNR-2100


Article:
Get consultation
The roll turnover device used with FRONTLIFT front-end loader is the right hand in agriculture. In course of forage conservation it makes operations on handling, movement, and staking significantly easier.
Height - 950 mm;
Roll diameter - up to 1,8 m;
Length - 1800 mm;
Width - in the open position 2,380 mm;
All characteristic
Design of this operating tool enables collection and stacking of rolls preventing damages of a packing material, raising at height of 3.4 m and lowering (by the lower edge of the roll), and turning them over at the angle of 90о.

The operating procedure significantly speeds up due to uniform grabbing of rolls width of which can be easily changed by using an adjusting piston rod.

Height
950 mm;
Roll diameter
up to 1,8 m;
Length
1800 mm;
Width
in the open position 2,380 mm;
Width with opened clamps
2500 mm;
Width with closed clamps
1900 mm;
Dimensions
1855х2017х868 mm;
Weight, kg
272;
Mass, kg
245;
Grip type
attachment adapters for FRONTLIFT; КУН-10; ПКУ-08; ПФ-05; СНУ-0,5; ДЗ-133; ТО-49;
Lifting height with load (under the cutting edge, for МТЗ 82.1), mm
3595 / 3650;
Dumping angle, °
108 / 106;
Reach below the ground level (for МТЗ82.1), mm
92;
Push force of the cylinder, t (at 20 MPa in the system)
6360;
Pulling force of the cylinder, t (at 20 MPa in the system)
2360;
Feedback